Blog

Best phone charger Introduction: Reveal Info of charger

 

How to choose the best phone charger?

So friend, when it comes to finding the best phone charger for your phone, we get very confused because there are many chargers in the market in different varieties in different price ranges, so read today’s article completely. Today I have brought many charger examples for all of you, through which I am going to make you all understand which will be the perfect charger for your mobile.

 

How are you all, I hope you all are enjoying your life very well and let’s talk about which is the best phone charger for your phone, then friend, the original charger is generally the best for your phone. We get to hear the same thing, but what to do, sometimes luck is bad, sometimes the charger gets damaged due to some reasons, sometimes the charger gets damaged or gets spoiled, and then in such a situation, we have to buy another charger for our phone. There is a need, now when you go to the market, you see that the price of charger ranges from fifty to thousand rupees and these are available in all different types.

 

So in such a situation, which phone charger is right, then first of all you should know which phone is yours which battery is installed in the phone, and how much mAh is your battery. Earlier, the old phones used to use Li-ion batteries, which could be charged easily even if you connected a charger with low output. But nowadays the battery that comes in mobile is a high-power battery and along with that it also comes with a battery of 3000mAh, 4000mAh, and 5000 mAh.

Read Also: Uncover the Secrets of Infinix Note 40 Pro Series

 

What is the most important thing about the best phone charger?

 

The most important thing is that whenever you are buying a best phone charger, the first thing that is seen in it is how many watts of charger it is, but we have made it as simple as I can for all of you to see the watts. There is no need. First of all, see how much voltage and how much current is being received in the output. If we talk about current, then current is measured in amps, so how much amperes are you getting in the output and how much voltage are you getting in the output?

 

How do we know technically which charger is the best phone charger?

 

If we multiply voltage and ampere, this is a little technical thing, but if you understand it then it is very good, if we multiply the voltage and ampere i.e. current, then it is equal to watts. Suppose you have a charger in which the output is 5 volts and the output current is 2 amps, then 5 into 2 becomes a 10-watt charger, then, in the same way, there are many different varieties of chargers. Along with this, if you purchase a local charger, you will notice that after a few days, your battery starts swelling or your mobile battery starts getting damaged. Because if you charge your phone with a local Rs. 50 charger, even if it is used for work, in whatever situation the charger is used, it damages your phone’s battery, so that’s why we have to A good charger is needed here.

 

I won’t waste your time here much longer. Coming straight to the practical, here you can see that there are a lot of chargers placed in front of you, you can see that this is an old type of charger.

 

 

this one used to come in Nokia phones, with a thin pin. Charger, I have also taken this as an example to understand, this is a charger which is my charger for Poco phone, this is a local charger, this is also a charger of a local company, okay and along with this, this is a charger of MI.

 

So if seen in this way, we have chargers from all the companies, from local to branded, available here. Now what should we do first? I want to explain to you that whenever you go to buy the best phone charger in the market, first of all, check your old charger to see what its capacity is, if not then we have 4000 mAh, 5000 mAh battery, then I will teach you to check what is the maximum capacity. First of all, where are those things written in the charger from where you can see the output, etc? So first of all let us start, we have this one, it is a mi charger, so let me show you, whenever you look in your charger, You will be able to see very clearly here.

 

We are not concerned with the input, you can see that here is the input. Talking about the input, the input given to you is 100 – 240 Volts and 50 to 60 Hz but we are not concerned with it.

 

 

We mean the output, so here you can see that this is a charger of 5 volts and 2 amps and this charger is better for nominal phones that have a battery of up to 3000 mAh this is not a smart charger, it is a normal one. The charger is a simple charger coming from MI, so in this way, you will see that it is a charger from a branded company and the advantage of buying from a branded company is that all the components installed inside it are genuine. They are original and well-fitted.

 

With this, let us now talk about this charger which comes from the Nokia company. Now if I talk about where is mentioned here, then you can see all the things are mentioned here, so if you can see here, then you can see that the output here is 5 volts and the output here is Which ampere i.e. current is 750 mA.

 

This is a Leon battery charger, despite having so much ampere at that time, it could charge the mobile very well. So, if you put such a charger in a five thousand mAh battery, it will not charge at all. He will not advance even one percent. If it increases even by one percent in an hour, it is a big deal.

 

With this, let us now go to some local charger. This is a charger from a local company, you can see and in this charger of a local company,

 

 

the input mentioned is 5.0V/2.4A which you can see and along with this it has the output mentioned and let me tell you the simple thing, it is 5.0V/2.4A. There is 2.4A output but this is a local company. The component installed inside it is not that good, it can be known by looking at it and as much as it has been promised, now think for yourself that the output is equal to the input, but this is not possible, there are some technical reasons for it, so this method If seen from the perspective, this charger is not proper and it is a very cheap charger, around Rs 150.

 

Along with this, let’s talk about the charger of another local company. Now see the charger of this type

 

 

You can see that it has two outputs. Now imagine that you have to charge 2 mobiles in which you will get 2 -ampere outputs each. Now, in such type of charger, if I show it on the back side, what is written here, you can see that the output is 5.0V/2.4A. This means that now do not understand that from both the ports. 2.4 A will not come out here but here it will be that both of them will be divided as 1.2, 1.2. Here both currents will be divided and you will get to see the voltage of 5.0, and 5.0. It means that you will have to check this type of charger also.

 

With this, now let us talk about our last charger here, which we call a smart charger which is the charger of my Poco m2 pro phone, it is called a smart charger because smart chargers are Let’s read your phone to see which device is connected to it. If I talk here, you will be able to see that the input is written here, see it in the first number.

 

 

Here input-output, input-output is written, so this is the type of charger that first reads your device and gives it the same amount of amperes and the same voltage as it requires and you can see if it has input. It gets 100-120V so that and here 50/60Hz and 0.5A so the output is 5V & 3A or 9V & 2A or 12V & 1.5A.

 

The output of this method depends on how much the device can take and then it detects it. Along with this, if you connect it between 200 to 240 volts which normally comes in our homes with 0.7A, then you can see that the output in it is 5V & 3A or 9V & 3A or 12V & 2.25A. Or 20V & 1.35A or 11V & 3A MAX can give you this, which means it does a lot of things, you can call it a variable charger which detects the device first.

 

So in this way you saw, I showed you different chargers and I showed you where things are mentioned, where you have to see where the ratings of the charger are written and especially we have to pay attention to the output. So, which would be the most perfect charger, then you should purchase a smart charger that can measure the voltage of a device.

 

You do not have to take any fix related to voltage and keep in mind that if you are a phone user with a four-five thousand mAh battery, then your maximum output current should be around three amps. The output voltage should be around nine volts. So in this way, I would like to say that whenever you purchase, purchase only a branded charger. Don’t get confused about local chargers otherwise, your phone may get damaged due to local chargers.

 

Today I have talked only about the best phone charger. The charger end is just two different things. Well, the thing you have to understand is that today we have told you that sometimes what happens is that only one is fine but the charger gets damaged and it becomes more stubborn if we do not have a cable. If the charger gets damaged then it is fine but if the charger gets damaged and is only fine then purchasing a new charger is a bit confusing but I tried to tell you in which way you have to purchase and in which way you have to disassemble. So finally our result is that you should purchase a charger with the best ampere and best voltage and you should purchase a smart charger.

 

Keep these things in mind while buying the best phone charger

 

Charging Standard Compatibility: Most expensive chargers come with Qualcomm Quick Charge, USB PD support, and other fast charging standards. In such a situation, decide whether these standards are compatible with your device to take advantage of fast charging or not.

 

Safety: Most companies provide various safety standards in their chargers, which include voltage, over-current, and short circuit protection, hence keep the safety standards in mind while buying the charger.

 

Ports: Some chargers come with multiple ports. These can charge one or more devices. In such a situation, if you want to charge multiple devices simultaneously, then make sure that the port provides enough current to charge all the connected devices or not.

 

Keep these important things in mind before using the best phone charger.

 

• Caution while using charger…

A few days ago, there were reports of people dying due to smartphone blasts. Many times you must have read that people die due to blasts in mobile phones while charging, why does this happen? A mobile can explode due to many reasons. Overheating is the main reason for this. Many precautions have to be taken not only while charging the phone but also while using the charger.

 

 

• Don’t buy fake chargers…

 

Many times, due to faulty phone chargers, people buy fake chargers from the local market to save some money and this can be harmful to both your life and that of the phone. Never buy cheap fake chargers. Instead, buy cheap off-brand chargers (made by legitimate retailers like Belkin and KMS). Note, that fake chargers cause bad condition of the battery which can prove dangerous for your smartphone in the future.